Tag Archives: jackett

Docker Compose – Plex with Plex Pass, Jackett, Sonarr, Radarr, Lidarr, qBittorrent, and PIA

Update: Now with prowlarr, too.

This docker-compose-yml file will run all of these services. This post assumes that you have a little technical knowledge already and that you have Docker and Docker Compose installed. This will run all the downloading with qBittorrent and encrypted over PIA VPN.

Here is the directory structure that this compose file needs.

 /home
└── user
   ├── data
   │   ├── movies
   │   ├── music
   │   └── television
   └── data2
       ├── config
       ├── data
       ├── jackett
       ├── lidarr
       ├── radarr
       └── sonarr
       └── prowlarr
/var
└── docker
   └── plex
       ├── config
       └── transcode

You’ll need to update the docker-compose file with your username. My username is user, so that is what you see in the structure above.

You can make these directories and set permissions with the following commands on Linux.

mkdir -p /home/$USER/data/{movies,music,television}
mkdir -p /home/$USER/data2/{config,data,jackett,lidarr,radarr,sonarr,prowlarr}
sudo mkdir -p /var/docker/plex/{config,transcode}
sudo chown $USER:$USER /var/docker/plex/{config,transcode}

In the docker-compose file, you’ll need to enter your PIA username and password. The Plex service is set up for Plex Pass usage, so you’ll need to enter your plex claim. Once everything is rolling, you’ll need to update path mappings in Sonarr, Radarr, and Lidarr. You do this in settings > download clients in each application.

You also need to setup the downloaders in Sonarr, Radarr, and Lidarr. You can do this through settings > download clients and then click the big plus button to add a client. If you’re not using SSL for your qBittorrent instance, you won’t need to check that box. The same goes for the password protection. If you’re looking to use SSL, you can check out this post of mine.

Now you need to set up Jackett with your indexers. This will be different for everybody, so follow the instructions that are widely available.

As promised, here is the docker-compose.yml file. You may need to change your UID/GID to what is applicable to your installation/user. Please read it thoroughly – especially the comments. There are things you will need to change.

version: '3.8'
services:
    
    pms-docker:
        container_name: plex
        network_mode: host
        hostname: plex
        runtime: nvidia
        environment:
            - TZ=America/New_York
            - PLEX_UID=1000
            - PLEX_GID=1000
            - PLEX_CLAIM=<your claim here> 
            - ADVERTISE_IP= #ip:port here e.g. http://127.0.0.1:32400
            - NVIDIA_VISIBLE_DEVICES=GPU-04aeacae-0ae1-25b6-1504-a4bec4ed2da9 #change as needed
            - NVIDIA_DRIVER_CAPABILITIES=compute,video,utility
        volumes:
            - /var/docker/plex/config:/config
            - /var/docker/plex/transcode:/transcode
            - /home/user/data/television:/data/tvshows
            - /home/user/data/movies:/data/movies
            - /home/user/data/music:/data/music
        restart: unless-stopped
        devices:
            - /dev/dri/card0:/dev/dri/card0 #your devices go here
            - /dev/dri/renderD128:/dev/dri/renderD128 #may be different
        image: plexinc/pms-docker:plexpass
    
    arch-qbittorrentvpn:
        container_name: qbittorrentvpn
        hostname: qbittorrentvpn
        cap_add: 
            - NET_ADMIN
        ports:
            - '6881:6881'
            - '6881:6881/udp'
            - '6969:6969'
            - '8118:8118'
        container_name: qbittorrentvpn
        restart: unless-stopped
        volumes:
            - '/home/user/data2/data:/data'
            - '/home/user/data2/config:/config'
            - '/etc/localtime:/etc/localtime:ro'
        environment:
            - VPN_ENABLED=yes
            - VPN_USER= #put your PIA username here
            - VPN_PASS= #put your PIA password here
            - VPN_PROV=pia
            - VPN_CLIENT=openvpn
            - STRICT_PORT_FORWARD=yes
            - ENABLE_PRIVOXY=yes
            - LAN_NETWORK=192.168.1.0/24 #possibly different
            - 'NAME_SERVERS=209.222.18.222,84.200.69.80,37.235.1.174,1.1.1.1,209.222.18.218,37.235.1.177,84.200.70.40,1.0.0.1'
            - VPN_INPUT_PORTS=1234
            - VPN_OUTPUT_PORTS=5678
            - DEBUG=false
            - WEBUI_PORT=6969 #not the default change in webui
            - UMASK=000
            - PUID=1000
            - PGID=1000
        sysctls:
            - net.ipv6.conf.all.disable_ipv6=1
        image: binhex/arch-qbittorrentvpn

    jackett:
        image: ghcr.io/linuxserver/jackett
        container_name: jackett
        environment:
            - PUID=1000
            - PGID=1000
            - TZ=America/New_York
            - AUTO_UPDATE=true 
            - RUN_OPTS=<run options here>
        volumes:
            - /home/user/data2/jackett/config:/config
            - /home/user/data2/data:/downloads
        network_mode: host #9117
        restart: unless-stopped
    
    radarr:
        image: ghcr.io/linuxserver/radarr
        container_name: radarr
        environment:
            - PUID=1000
            - PGID=1000
            - TZ=America/New_York
        volumes:
            - /home/user/data2/radarr:/config
            - /home/user/data/movies:/movies
            - /home/user/data2/data:/downloads
        network_mode: host #7878
        restart: unless-stopped

    sonarr:
        image: ghcr.io/linuxserver/sonarr
        container_name: sonarr
        environment:
            - PUID=1000
            - PGID=1000
            - TZ=America/New_York
        volumes:
            - /home/user/data2/sonarr:/config
            - /home/user/data/television:/tv
            - /home/user/data2/data:/downloads
        network_mode: host #8989
        restart: unless-stopped

    lidarr:
        image: ghcr.io/linuxserver/lidarr
        container_name: lidarr
        environment:
            - PUID=1000
            - PGID=1000
            - TZ=America/New_York
        volumes:
            - /home/user/data2/lidarr:/config
            - /home/user/data/music:/music 
            - /home/user/data2/data:/downloads 
        network_mode: host #8686:8686
        restart: unless-stopped
  
prowlarr:
    image: lscr.io/linuxserver/prowlarr:develop
    container_name: prowlarr
    environment:
      - PUID=1000
      - PGID=1000
      - TZ=America/New_York
    # put your directories here
    volumes:
      - /home/user/data2/prowlarr:/config
    network_mode: host #9696
    restart: unless-stopped

Now you should be able to cd into the directory that contains this docker compose file, and then run

sudo docker compose up

# or the following, so output isn't printed to screen

sudo docker compose up -d  

This post should point you in the right direction, at least. I’m not responsible for any errors. Things may have been updated since I wrote this post. Special thanks to linuxserver.io and binhex for the images.